1 Soal
1 1. buat topologi yang terdiri dari 2 PC, 1 switch, 1 router dengan ketentuan
1 Terapkan 2 vlan pada switch
1 Terapkan 2 vlan pada router
1 Masing masing VLAN berbeda jaringan IP
1 Terapkan pada packet tracer
1 Rancangan jaringan
1. Setting interface router
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown
Router(config-if)#exit
2.
Setting vlan pada router
a.
Sub interface vlan1
Router(config)#interface
fa0/0.2
Router(config-subif)#encapsulation
dot1Q 2
Router(config-subif)#ip
address 192.168.2.1 255.255.255.0
Router(config-subif)#no
shut
Router(config-subif)#ex
b.
Sub interface vlan2
Router(config)#interface
fa0/0.3
Router(config-subif)#encapsulation
dot1Q 3
Router(config-subif)#ip
address 192.168.3.1 255.255.255.0
Router(config-subif)#no
shut
Router(config-subif)#ex
3.
Setting switch
a.
Setting interface mode trunk
Switch>en
Switch#conf
t
Enter
configuration commands, one per line.
End with CNTL/Z.
Switch(config)#interface
fa0/1
Switch(config-if)#switchport
mode trunk
Switch(config-if)#exit
b.
Setting interface vlan1
Switch(config)#interface
fa0/2
Switch(config-if)#switchport
mode access
Switch(config-if)#switchport
access vlan 2
% Access
VLAN does not exist. Creating vlan 2
Switch(config-if)#ex
c.
Setting interface vlan2
Switch(config)#interface
fa0/3
Switch(config-if)#switchport
mode access
Switch(config-if)#switchport
access vlan 3
% Access
VLAN does not exist. Creating vlan 3
Switch(config-if)#switchport
access vlan 3
Switch(config-if)#
4.
Setting router set DHCP
Router>enable
Router#configure terminal
Router(config)#ip dhcp pool dhcp20
Router(dhcp-config)#default-router 192.168.2.1
Router(dhcp-config)#network 192.168.2.1 255.255.255.0
Router(dhcp-config)#exit
Router(config)#ip dhcp pool dhcp30
Router(dhcp-config)#default-router 192.168.3.1
Router(dhcp-config)#network 192.168.3.0 255.255.255.0
Router(dhcp-config)#exit
Router(config)#
